Request a Rapid Quote for Test And Measurement Part Number TP-108-02-1-S by Components Corp

Mfg Part Number : TP-108-02-1-S

Manufacturer : Components Corp

Main Category : Test And Measurement

Category : Test Equipment

Sub Category : Surface Mount Test Points

Description : The Tp-108 Is Manufactured From Spring Tempered Phosphor Bronze Flat Wire Using A Proprietary Process That Yields A Long Life And Absolute Durability. The Use Of Flat Wire Provides A Larger Surface Area Of Mounting, Important When Considering The Mechanical Stresses A Common To The Testing Process. The Standard Tp-108 Test Point Has A .0001 Minimum Matte Tin Finish Over .0001 Nickel Underplate, Is Available In .0001 Minimum Silver Over .00005 Minimum Copper, And Is Compatible With The Reflow Soldering Process. Units Are Supplied In Tape And Reel Format On 7' Reels For Automatic Placement Systems. The Tape Format Is 8mm Wide By 4mm Pitch. Black Conductive Carrier Tape Conforms To The Ansi/Eia-48 I Standard. Offered In Matte Tin And Silver Plated Options.

Whether you are searching for factory-new components or obsolete items with long lead times, Dash Electromechanicals is a one-stop shop with countless ready-for-purchase products available, our solutions being backed by industry-leading customer service. You have reached the RFQ page for part number TP-108-02-1-S, a Components Corp item that is listed alongside the description “The Tp-108 Is Manufactured From Spring Tempered Phosphor Bronze Flat Wire Using A Proprietary Process That Yields A Long Life And Absolute Durability. The Use Of Flat Wire Provides A Larger Surface Area Of Mounting, Important When Considering The Mechanical Stresses A Common To The Testing Process. The Standard Tp-108 Test Point Has A .0001 Minimum Matte Tin Finish Over .0001 Nickel Underplate, Is Available In .0001 Minimum Silver Over .00005 Minimum Copper, And Is Compatible With The Reflow Soldering Process. Units Are Supplied In Tape And Reel Format On 7' Reels For Automatic Placement Systems. The Tape Format Is 8mm Wide By 4mm Pitch. Black Conductive Carrier Tape Conforms To The Ansi/Eia-48 I Standard. Offered In Matte Tin And Silver Plated Options.” If you wish to learn about your purchasing options for part number TP-108-02-1-S, you can use the form provided below to request a quote for your consideration.

Note : We Will Not Share Your Information With Any Third Parties.

Product Details

“*” Required Fields are Compulsory

Contact Information

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/ . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

Upload RFQ SHEET

If you have more than one item, upload your spreadsheet here

In addition to part number TP-108-02-1-S, we offer a variety of other similar items from Components Corp that you can explore and benefit from. Furthermore, with our AS9120B, ISO 9001:2015, and FAA AC 00-56B accreditation, you never have to be concerned about the fit, form, or function of your purchased electromechanical parts. We are also fully committed to alleviating the time constraints of our customers, offering expedited shipping speeds on a myriad of The Tp-108 Is Manufactured From Spring Tempered Phosphor Bronze Flat Wire Using A Proprietary Process That Yields A Long Life And Absolute Durability. The Use Of Flat Wire Provides A Larger Surface Area Of Mounting, Important When Considering The Mechanical Stresses A Common To The Testing Process. The Standard Tp-108 Test Point Has A .0001 Minimum Matte Tin Finish Over .0001 Nickel Underplate, Is Available In .0001 Minimum Silver Over .00005 Minimum Copper, And Is Compatible With The Reflow Soldering Process. Units Are Supplied In Tape And Reel Format On 7' Reels For Automatic Placement Systems. The Tape Format Is 8mm Wide By 4mm Pitch. Black Conductive Carrier Tape Conforms To The Ansi/Eia-48 I Standard. Offered In Matte Tin And Silver Plated Options. items for both domestic and international orders. With this in mind, get in touch with us today, and see how we can save you time and money on all the Test Equipment products you require.

Related Electromechanical Components of TP-108-02-1-S

TP-002
Connectors
Other

TP-10-453-2
Concord

TP-10015
Honeywell

TP-100AU
Connectors
Other

TP-101
Connectors
Other

TP-101-01-04
Components Corp

TP-101-01-09
Components Corp

TP-101-10
Through Hole Mount Test Points
Components Corp

TP-101-10-T
Through Hole Mount Test Points
Components Corp

A Complete Electromechanical Parts Purchasing Platform

AS9120B and ISO 9001:2015
Aviation Suppliers Association Member
FAA AC 0056B Accredited
AS 6081:2012 Certification
ESD S20.20-2014 Certification

	Guaranteed on-time delivery
	Over 5100 manufacturers
	Customized and user-friendly database
	Competitive Prices
	Scheduling Flexibility
	Complete purchasing solutions